Rolling left threading

Rolling left threading:

1.Adjust the threading rollers and eccentric sleeve, and then turn switches to anticlockwise turning and left thread.

2. Anticlockwise rotate the feed lever, now the rolling head anticlockwise turning (face to the rolling head) and strip rib off the rebar until the tool posts open.

3. Keep turning the feed lever (attention: can not feed too fast). The rolling head automatically change to clockwise turning.

4. Keep feeding with force, just a few seconds, the machine can achieve automatic feed, change the rotating direction and return after finishing.

5. Give reinforcement by clockwise turning the feed lever to help the machine head go back to the initial position. Then the machine stops.